Keeper Camo Tie-Downs

Tie-Downs are the fastest, easiest and safest way to secure your cargo. Unlike rope and twine, they work without having to tie knots. Ratchet Tie-downs apply the perfect amount of tension to the load and lock to prevent accidental release. Cam buckle Tie-Downs combine security with speed. Small teeth grip webbing tight and a thumb release lever makes using them quick and easy.
4HOW TO CHOOSE A TIE-DOWN Keeper recommends using a minimum of two (2) Tie-Downs to secure cargo and prevent load shift. Each Tie-Down should have a Working Load Limit equal to or greater than the weight of your cargo. 4WORKING LOAD LIMIT The maximum cargo weight a Tie-Down can safely handle and still accommodate unexpected forces caused by speed, road conditions or emergencies. The Industry Standard for Working Load Limit is 1/3 the Break-Strength of the Tie-Down assembly. Read about CAPACITY RATING & LOAD LIMITS to choose the correct Keeper Tie-Down
4OPERATING INSTRUCTIONS FOR RATCHET TIE-DOWNS 1. Place webbing over load and attach hooks to solid anchor points. 2. Insert webbing through ratchet reel and pull until ALL slack is out of webbing. (Figure 1)
3. Pump ratchet handle to make webbing tight. Ratchet reel must have at least two layers of webbing wound around it.
4. CAUTION, too many layers of webbing will jam ratchet. If too much web is piling on ratchet reel, start procedure over, first removing ALL slack from webbing over load. 5. After load is secured, move handle down flat for transit. (Figure 2) 6. To release, compress release bar and open handle 180 degrees. (Figure 3)
4OPERATING INSTRUCTIONS FOR CAM BUCKLE TIE-DOWNS 1. Thread webbing through buckle. Press the release lever and feed webbing up from the bottom and under the cam buckle teeth as shown by the arrow on the buckle. (See Figure to Right)
2. Place webbing over load, adjust length and attach hooks to solid anchor points. 3. Pull webbing tight to set desired tension. 4. To loosen, press release lever.